# Installing Your Zwift Click

> After mounting your bike on the trainer, follow these steps to install the Zwift Click V2 or Zwift Click V1...

Source: https://support.zwift.com/en_us/installing-your-zwift-click-H1pXM6Zp

Last updated: 2025-09-09T14:59:59.464Z

# Installing Your Zwift Click

After mounting your bike on the trainer, follow these steps to install the [Zwift Click V2](#Zwift_Click_V2) or [Zwift Click V1](#Zwift_Click_V1).

The Zwift Click fits on a variety of bar shapes and can be positioned in a number of different locations depending on your setup and preference.

## Zwift Click V2

Follow these steps to install the Zwift Click V2:

1.  Open the Zwift Click box and remove all of the items from inside.
    
2.  Identify the left and the right controller.
    
    The left controller has black buttons; the right controller has colorful buttons.
    
3.  Install the left controller:
    
    For drop handlebars, we recommend using one strap per controller and you may not need the bar mount. For flat or TT bars, we recommend using two straps per controller.
    
    1.  Place the Zwift Click onto the smooth side of the bar mount—the rubber disc.
        
    2.  Place the Zwift Click and bar mount on your preferred location on the left side of your handlebars.
        
    3.  Hook the top hole on one of the attachment bands onto the Zwift Click, wrap it around the handlebar and loop it over the diagonally facing hook on the controller.
        
        *   Fold the attachment band back over the hook to avoid any excess getting in the way.
            
    4.  If necessary, hook the top hole on a second attachment band onto the Zwift Click, wrap it around the handlebar and loop it over the remaining hook on the controller.
        
        *   Fold the attachment band back over the hook to avoid any excess getting in the way.
            
    5.  Ensure the attachment band is tight, keeping the controller in place.
        
4.  Install the right controller:
    
    For drop handlebars, we recommend using one strap per controller and you may not need the bar mount. For flat or TT bars, we recommend using two straps per controller.
    
    1.  Place the Zwift Click onto the smooth side of the bar mount—the rubber disc.
        
    2.  Place the Zwift Click and bar mount on your preferred location on the left side of your handlebars.
        
    3.  Hook the top hole on one of the attachment bands onto the Zwift Click, wrap it around the handlebar and loop it over the diagonally facing hook on the controller.
        
        *   Fold the attachment band back over the hook to avoid any excess getting in the way.
            
    4.  If necessary, hook the top hole on a second attachment band onto the Zwift Click, wrap it around the handlebar and loop it over the remaining hook on the controller.
        
        *   Fold the attachment band back over the hook to avoid any excess getting in the way.
            
    5.  Ensure the attachment band is tight, keeping the controller in place.
        
5.  Press the buttons on the controllers to ensure the controllers are securely attached.
    
    A little movement is OK.
    
    1.  If the controllers are slipping on your handlebars, try moving the attachment band to the next loop to make it tighter.
        
    2.  Once you're all set, check out our article for info on [on](https://support.zwift.com/en_us/connecting-your-zwift-play-to-zwift-Hkj2iEbrn) [connecting your Zwift Click to Zwift](https://support.zwift.com/en_us/connecting-your-zwift-click-to-zwift-HycbzrXZp).
        

## Zwift Click V1

Follow these steps to install the Zwift Click V1:

1.  Open the Zwift Click box and remove all of the items from inside.
    
2.  Place the Zwift Click onto the smooth side of the bar mount—the rubber disc.
    
3.  Place the Zwift Click and bar mount on your preferred location on your handlebars.
    
4.  Selecting the size that best fits your handlebars, hook one attachment band onto the Zwift Click and stretch it around the handlebar and hook over the diagonally facing hook.
    
5.  Stretch the second attachment band around the handlebar and hook over the remaining two hooks.
    
6.  Check out our article for info on [connecting your Zwift Click to Zwift](https://support.zwift.com/en_us/connecting-your-zwift-click-to-zwift-HycbzrXZp).
    

Ride On.

\-The Team at Zwift